Parts and accessories for 1936 – 1953 Vintage Indian Motorcycles

Crankcase

Catalog : 1953 Chief : Crankcase

Ref

Part #

Description

Price

# required
per assembly

Ref Part # Description Price # required
per assembly
1 JG-2970 CRANKCASE W/CAM COVER, 1948 style, will accept aluminum or cast iron oil pump
2 504006 RACE, 1.817'' O.D, .954'' thick, (standard), pinion $40.00 1
3 JG-2554 RACE, 1.820'' O.D, .954'' thick, (.003 oversize), pinion $44.00 1
4 JG-2555 RACE, 1.822'' O.D, .954'' thick, (.005 oversize), pinion $44.00 1
5 JG-3482 RACE, 1.827'' O.D, .954'' thick, (.010 oversize), pinion $44.00 1
6 50250 SNAP-RING, pinion housing race $2.00 1
7 924014 THRUST WASHER, .900''I.D .052'' thick, pinion shaft & drive shaft seal $5.75 2
8 28B161 RACE RETAINING NUT, $14.00 1
9 35B894 MAGNETO HOLE PLUG, $3.50 1
10 40871 RACE, 1.752" 0.D (Standard), drive $75.00 1
11 40871-T RACE, 1.755" O.D (.003 oversize), drive $75.00 1
12 JG-2556 RACE, 1.757" O.D (.005 oversize), drive $92.00 1
13 JG-3483 RACE, 1.762" O.D (.010 oversize), drive $90.00 1
14 762016 NEOPRENE SEAL, drive shaft, (See sealed primary and transmission conversion) $11.50 1
15 661003 PLUG, 3/4"-24(Slotted), oil fill and inspection $8.50 1
16 40056 STUD, 3/8''-24 X 3/8''-16 1.650'' long, cylinder base; Cad Plated $3.50 1
17 661006 PLUG, 1/8" pipe thread(Hex), oil drain and level check, NOT Magnetic; Cad Plated $4.25 2
18 JG-2484 PLUG, 1/8" pipe thread(Hex), oil drain and level check, Magnetic; Cad Plated $6.50 A/R
19 JG-2379 MOTOR MOUNTS, left and right front $180.00 1
20 74483 MOTOR MOUNT, left front, (Order Kit JG-2379) $75.00 1
21 74482 MOTOR MOUNT, right front, (Order Kit JG-2379) $75.00 1
22 JG-2358 FASTENERS, Crankcase, Cad Plated $62.00 1
23 207117 BOLT, 5/16''-24 X 1.500''(Hex) $3.75 2
24 207121 BOLT, 5/16''-24 X 2''(Hex), Upper & Lower, Rear $4.50 2
25 207139 BOLT, 5/16''-24 X 4.500''(Hex) Bottom, Center $6.00 2
26 209010 BOLT, 7/16''-20 X 5.500''(Hex), Bottom, Center $7.75 2
27 22B25 CRANKCASE STUD, 5/16''-24 X 5/16''-18 X 2.500'' Top, Front; Cad Plated $9.00 1
28 28B314 CRANKCASE STUD, #10-32 X 5.63'' long, Top, Center $6.75 1
29 922004 WASHER, #10 Split Lock; Cad Plated $0.75 3
30 922007 WASHER, 5/16'' Split Lock; Cad Plated $0.75 2
31 922009 WASHER, 7/16'' Split Lock; Cad Plated $0.50 2
32 604005 NUT, #10-32(Hex)Cad Plated $0.50 3
33 606010 NUT, 5/16''-24(Hex); Cad Plated $1.25 7
34 606014 NUT, 7/16''-20(Hex); Cad Plated $1.00 2
35 JG-2474 FASTENERS, brace to crankcase stud $9.50 1